TM-88 Multimeter
TM-88 Multimeter has been designed for use in environments of pollution degree 2. It can be used for VOLTAGE and CURRENT measurements on installations of overvoltage CAT III 1000V and CAT IV 600V. This instrument is not suitable for measurements of non sine wave voltage and current. When using the instrument always respect the usual safety regulations aimed at protecting you against the dangerous electric currents and protecting the instrument against incorrect operations. Only the leads supplied with the instrument guarantee compliance with the safety standards in force. They must be in good conditions and, if necessary, replaced with identical ones. Do not test or connect to any circuit exceeding the specified overload protection.
Features
- CAT IV 600V.
- LCD display with maximum reading of 4000.
- Plus decimal point.
- Analog Bargraph.
- AC voltage range: 0 to 600V.
- DC voltage range: 0 to 600V.
- Auto power off (15 minutes).
- REL. (ZERO)
- Data Hold.
- Range Hold.
- Auto range.
- Auto power Off
- Test ranges: ACV, DCV, Resistance, Continuity, Diode, Frequency.
- Double injection outer case.
- Continuity buzzer.
Technical Specifications
Items | Descriptions |
---|---|
Display counts | 4000 |
Overvoltage category | CAT IV 600V |
AC Voltage | 1mV~600V ±(1.0% +3dgt) |
DC Voltage | 0.1mV~600V ±(0.8% +2dgt) |
Resistance | 0.1Ω~40MΩ ±(1.0 +3) |
Diode | 1.5VDC. |
Frequency | 0.001Hz-1OKHz ±(0.8% +2). |
Dimension | 200x51x30mm. (LxWxH) |
Weight | About 150g. |